Construction Safety Checklist

Site Access & Housekeeping

Ensure site entrance and exits are clearly marked and accessible. Keep walkways, stairs, and scaffolding clear of debris. Maintain proper signage for hazards and restricted areas. Store tools and materials securely to prevent trips or falling objects.

Personal Protective Equipment (PPE)

Hard hats are worn at all times on site. Safety boots with proper grip are used. High-visibility clothing is worn where required. Eye and hearing protection is used during relevant tasks. Fall protection equipment is inspected before use.

Working at Heights

Scaffolding is properly erected and inspected. Guardrails or safety nets are in place where needed. Ladders are secured and used correctly. Workers are trained and equipped for working at height.

Tools & Equipment

Power tools are inspected before use. Electrical equipment is used with proper grounding and protection. Hand tools are in good condition and stored properly. Heavy machinery operators are trained and authorized.

Excavation & Trenching

Shoring, benching, or sloping used on any trench deeper than allowance. Keep spoil piles and plant at least 600mm from trench edges. Test atmospheres and use a permit for confined-space entry. Provide safe access (ladders) within 7m of any worker in a trench.

Electrical Safety

Use RCD/GFCI protection on all temporary site power. Inspect leads, plugs, and tools before each use. Maintain exclusion distances from overhead and buried lines. Isolate and lock out supplies before electrical work.

Plant & Machinery

Only certify and operate plant with valid inspection tags. Maintain exclusion zones around moving plant and rotating parts. Fit and use reverse alarms and warning beacons on vehicles. Refuel and maintain equipment in designated, safe areas.

Fire & Hot Works

Use a hot-work permit for cutting, welding, or grinding. Keep extinguishers and fire watch present during hot works. Store flammable gases and liquids away from ignition sources. Clear combustible material from the work area before igniting.

Noise & Vibration

Map high-noise zones and enforce hearing-protection areas. Limit exposure time and rotate operators on vibrating tools. Maintain and dampen equipment to reduce vibration transfer. Offer hearing checks for regularly exposed workers.